Grinding machine use method - Database & Sql Blog Articles

Single chip microcomputer STM32L151CCU6

Mobile phone crystal 3.2*2.5mm 3225 26M (26.000MHZ) 7.5PF 10PPM 20PPM 30PPM

SMD aluminum electrolytic capacitor

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin

product name:

ZSY-6

Grinder

one,

ZSY-6

Grinder overview

:

It is specially designed for rubber factories and scientific research units to grind rubber test pieces to a certain thickness for testing by other test equipment. It is one of the indispensable equipment for testing rubber quality.

It is mainly composed of the main components such as the carriage feed carriage, work wheel, vacuum cleaner, electric motor and grinding wheel. The two types of grinding wheels, which are thick and thin, are formed at the same time, and have the characteristics of one machine and two machines. The grinding machine is easy to use, saves time, improves work efficiency, and is safe and reliable.

two,

ZSY-6

Grinding machine use method

:

l

Move the small handle to open the knurled eccentric ball, clamp one end of the rubber test piece, and then press the other end of the test piece counterclockwise and press the movable pressure stick along the working wheel.

2

Start the motor and turn the grinding wheel in the direction indicated by the front.

3

Shake the handle so that the upper carriage is fed along the lower rail, and the dial is equipped with a dial.

.

4

The safety device is installed in the handwheel. The handwheel can only be turned counterclockwise, otherwise excessive force will damage its safety device.

5

At the time of work, it should be coarsely ground and then finely ground.