Usb Switch And Socket,Usb Kvm Switch,Usb 3 Switch,Usb Socket ZHEJIANG HUAYAN ELECTRIC CO.,LTD , https://www.huayanelectric.com
Foreword: Previously found in the forum did not find a specific method for Huawei to enter the REC mode, and now some of the box into the REC mode is also different, so re-open a post about the current Huawei Wyatt into the REC Both methods of the mode require the use of a remote control to operate Huawei Wyatt. There are currently two types of remote controllers. One is a relatively long white one, and the other is a slightly shorter black, as shown below: 
1. How to enter the white remote control into the Huawei REC REC mode:
After the set-top box is turned on, press the power button at the back to turn it on, and then press the blue “standby†button continuously (crazy!!), and the REC mode will be displayed for a moment; 
2. How to enter the black remote control into the Huawei REC REC mode:
(1) After the set-top box is turned on, press the power key at the back to turn it on, followed by continuous (or mad press!) Press the red power button, the frequency is also faster, and it will enter the REC mode;
Hide the contents of this post 
(2) After turning on the set-top box, turn on the power button, press the power button on the back of the box, and press the “left and right†key of the remote control. The sequence is “left, right, left, rightâ€. This method has a higher failure rate and requires a single 20-year period. Only hand speed can do it! ! Back and forth by 8 9 rounds is almost entered (two hands are recommended here, one left and one right); 
3, well, after entering the REC mode, we must begin to do a serious job, first put a picture:
Let's explain what these options are like (1) update from external storage (2) update from backup application (3) clear Dalvik cache (4) restore factory settings (5) clear user data folder (6) restart set top box generally In case we want to upgrade, we can choose 1 or 2. If the crack failure causes the box to restart indefinitely, you can select ShuangQing to restore the factory settings, choose 4, 5, of course, you have to think about the cache in Dalvik can also be unclear The friend can do it yourself under Baidu and I understand that some of the user's box contents in the REC mode do not match the one in this picture. The 1 and 2 in this REC mode are Shuangqing and factory reset settings, so When choosing friends, if your friends are not the same as the above pictures, it's best to translate the English and Chinese languages ​​to see what they mean. Then choose the operation! !
The above is how Huawei's Wyatt Box enters REC mode to upgrade Shuangqing's fullest method for restoring factory settings. If there is a problem, please leave a message below. I will reply in time after seeing it!
Huawei's Wyatt Box crack tutorial: Huawei Wyatt box EC6108V93/94/97, (EC6108V9C, EC6108v9U-pub) U disk crack tutorial
Http://bbs.shafa.com/thread-1415320-1-1.html
Huawei Wyatt EC6108V9 Series - Hass chip pass brush firmware crack tutorial
Http://bbs.shafa.com/thread-1374005-1-1.html
Huawei Wyatt EC6108V93/94/97/9C/9U-pub save bricks and crack tutorial
Http://bbs.shafa.com/thread-1374403-1-1.html
[Line brush] Huawei Wyatt box EC6108v9A National General crack (support black and white remote control)
Http://bbs.shafa.com/thread-1373352-1-1.html