Apple or the entire mobile phone industry is like blowing blowers in the mobile phone's wireless charging industry. However, when the wind is too cold, people will always protest and turn off the wind. Most of the pigs on the outlet fall. The entire wireless charging industry, after experiencing a lot of excitement, should keep calm and think about how to make wireless charging go further and further through the air outlet. According to the market and the needs of users, to break the wireless charging dilemma, we must continue to work hard in the following aspects. Wireless charging standard issues. The core principle of wireless charging is based on electromagnetic induction, and the principle is not complicated. At present, there are two main technical branches in the industry, one is the magnetic field induction technology represented by the Qi standard, and the other is the magnetic resonance technology represented by the AirFuel standard. As the so-called non-conformity is not a rule, wireless charging standards must be highly unified. At present, the civilian field is more inclined to the QI standard. Different branded products can be charged with the Qi wireless charger as long as they have a Qi logo. Charging efficiency problem. This is a problem that wireless chargers urgently need to solve. Many people are reluctant to use wireless chargers. Part of the reason is that the charging speed is slower than traditional wired charging, let alone fast charging. The iPhoneX currently supports a 7.5W wireless fast charge. According to the test data, the 7.5W full time is about 3 hours to 3 hours and 30 minutes. Of course, the output of Samsung Wireless Fast Charge is about 10W, but there is no advantage in speed compared to wired charging. Phone model support. As the so-called slapstick does not ring, wireless chargers are completely useless for mobile phones that do not have wireless charging capabilities. Although Apple's latest models of mobile phones and Samsung’s mobile phones all support wireless charging, other mobile phone manufacturers are slow to follow up. Like millet only MIX2S flagship models support wireless charging, and Huawei, OPPO, VIVO mobile phone manufacturers, it seems For wireless charging is still in a wait-and-see state. Wireless chargers need to be supported by more and more mobile phone models. Limit of charging distance. Wireless charging is a distance limit, the general QI wireless charging vertical distance is only 5mm, these years can be 7mm or even 10mm, but still far from enough, can only solve the distance between mobile phone sets, which means that the user's mobile phone Still can not leave the shackles of the data line. We have always dreamed that wireless charging can completely get rid of the spatial distance limitation like WiFi, and can reach distances of five meters and ten meters in the vertical distance and horizontal movement area, but wireless charging at this distance is currently very unlikely to be realized. Even though Tucao wireless charging has many shortcomings, it is only a little flaw in the good experience. Moreover, for these products, major manufacturers are also further improving. Take 3C accessory brand Baseus Bose as an example to focus on wireless charging products. After several years of research and development, a series of wireless charging products have been launched. For mobile phones that do not support wireless charging on the market, Bestech has developed and promoted a corresponding wireless charging receiver patch to enable mobile phones that do not support wireless charging receivers. You can also experience wireless charging. In addition, with the launch of the Xiaomi MIX2S, it is believed that more domestic mobile phones will accelerate the pace of adopting wireless charging technology and introduce more smart phone handsets that support wireless charging. It is believed that under the efforts of major manufacturers, these problems existing in wireless charging will be solved one after another. By then, wireless charging technology will usher in a peak of development.
ZGAR AZ Vape Pods 5.0
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
From production to packaging, the whole system of tracking, efficient and orderly process, achieving daily efficient output. WEIKA pays attention to the details of each process control. The first class dust-free production workshop has passed the GMP food and drug production standard certification, ensuring quality and safety. We choose the products with a traceability system, which can not only effectively track and trace all kinds of data, but also ensure good product quality.
We offer best price, high quality Pods, Pods Touch Screen, Empty Pod System, Pod Vape, Disposable Pod device, E-cigar, Vape Pods to all over the world.
Much Better Vaping Experience!
Pods, Vape Pods, Empty Pod System Vape,Disposable Pod Vape Systems ZGAR INTERNATIONAL(HK)CO., LIMITED , https://www.szvape-pods.com
